Safety GPS Low Power Positioning Helmet-----OX-ZP68
Product overview
Product introduction: long standby positioning terminal, solar charging, no charger charging, no exposed interface, waterproof grade IP68
Product Configuration List
No. |
Product Name |
quantity |
unit |
remark |
1 |
host machine |
1 |
set |
|
2 |
Manual, warranty card, certificate of qualification |
1 |
piece |
Three in one |
3 |
packing box |
1 |
box |
|
Product whole machine parameter table
No. |
program |
specification |
remark |
1 |
Working voltage |
DC 3.7-4.2 |
|
2 |
Working current |
40-80mA@3.7V |
|
3 |
Low power standby current |
2mA |
|
4 |
specification and dimension |
18x28x22cm |
|
5 |
location mode |
base station +GPS location+WIF location |
|
6 |
position error |
The GPS positioning error is less than 10m (this data is for reference, and the positioning error is related to the terrain, time and other factors in the area where the vehicle is located). The base station positioning error is based on the base station density in the region |
The data are measured in the laboratory of the company |
7 |
communication network |
GSM850/900/1800/1900MHz |
|
8 |
SIM |
support |
|
9 |
G-sensor |
The cap body is in static state for 10 minutes, and the device enters hibernation state. When wearing the cap body, the device will start up |
|
10 |
Working temperature |
-25ºC ~ +75ºC |
|
11 |
Storage temperature range |
-40ºC ~ +85ºC |
|
12 |
Net weight |
400g |
|
13 |
Battery Operating Time |
The standby time is 15 days when the solar energy is not charged |
|
14 |
battery capacity |
800mAh |
|
15 |
Solar power |
6V 80ma |
|
Indicator status description
The machine number |
Set the machine number |
Green light |
Trigger the boot, the light will flash slowly for 3 times,, indicating that the machine is started, and the hibernation flash for 3 times |